Ceramic Gauge Blocks Set

Ceramic Gauge Blocks Set , which are combination of different size block, can be composed of different sizes according to the requirement, also can be used as specific measurements.

Maintenance free, wear resistance, corrosion resistance, non magnetic, non conductive, can be applied to special working environment. Good dimensional stability. No plastic deformation, small notch does not affect the test results. The thermal expansion coefficient is close to that of steel, which is superior to other traditional materials. The utility model is especially suitable for the caliper and micrometer.

Ceramic Gauge Blocks Set, there are two kinds of type, such as metric and inch:

Metric Series

Class：class K, class, class 1

Caliper、Micrometer Set ：Class 0, Class 1

Standard Reference：GB/T 6093、 DIN EN ISO3650、 JIS B 7506

Material	Ceramic	Steel
Hardness（HV)	1350	800
The coefficient of thermal expansion（10^-6/℃）	9.5±1	11.5±1
Density (g/cm³)	6	7.8
Bending strength（MPa）	800-1000	2000
Elastic Modulus (10⁴Kgf/mm²)	2.1	2.1
Poisson’s ratio	0.3	0.3
Thermal Conductivity (cal/cm.sec.℃)	0.007	0.13

Standard Sets：

Number of Blocks	Composition Size	Number of Blocks	Composition Size
32 pcs , Standard Reference DIN EN ISO3650	1.005—1 pcs	83pcs , Standard Reference GB/T 6093	1.005—1pcs
	1.01–1.09，Interval 0.01， 9pcs		1.01–1.49，interval 0.01，49pcs
	1.1–1.9，interval0.1，9pcs		1.6–1.9，interval 0.1，4pcs
	1–9，interval 1，9 pcs		0.5–9.5，interval 0.5，19pcs
	10–30，interval 10，3 pcs		10–100，interval10，10pcs
	50—1 pcs
32pcs, , Standard Reference JIS B 7506	1.005—1pcs	87pcs, Standard Reference DIN EN ISO3650	1.001–1.009，interval0.001， 9pcs
	1.01–1.09，interval0.01，9pcs		1.01–1.49，interval0.01，49pcs
	1.1–1.9，interval 0.1，9pcs		0.5–9.5，interval0.5，19pcs
	1–9，interval 1, 9pcs		10—100,interval 10，10pcs
	10–30，interval10，3 pcs
	60—1pcs
38pcs, , Standard Reference GB/T 6093	1.005—1pcs	88pcs, Standard Reference JIS B 7506	1.0005—1pcs
	1.01–1.09，interval 0.01，9pcs		1.001–1.009，interval 0.001，9pcs
	1.1–1.9，interval 0.1，9pcs		1.01–1.49，interval0.01，49pcs
	1–9，interval1，9pcs		0.5–9.5，interval 0.5，19pcs
	10—100, interval 10，10pcs		10–100，interval 10，10pcs
46pcs, , Standard Reference DIN EN ISO3650	1.001–1.009，interval0.001，9pcs	91pcs, Standard Reference GB/T 6093	1.001–1.009，interval 0.001，9pcs
	1.01–1.09，interval0.01，9pcs		1.01–1.49，interval 0.01，49pcs
	1.1–1.9，interval0.1，9pcs		1.6–1.9，interval 0.1，4pcs
	1–9，interval1，9pcs		0.5–9.5，interval 0.5，19pcs
	10–100，interval10，10pcs		10–100，interval10，10pcs
47pcs, , Standard Reference DIN EN ISO3650	1.005—1pcs	103pcs, Standard Reference DIN EN ISO3650	1.005—1pcs
	1.01–1.19，interval 0.01，19pcs		1.01–1.49，interval 0.01，49pcs
	1.2–1.9，interval0.1，8pcs		0.5–24.5，interval 0.5，49pcs
	1–9，interval1，9pcs		25–100，interval 25，4pcs
	10–100，interval10，10pcs
Number of Blocks	Composition Size	Number of Blocks	Composition Size
47pcs JIS B 7506 Standard Reference	1.005–1pcs	112pcs DIN EN ISO3650	1.0005–1pcs
	1.01–1.09，interval0.01，9pcs	Standard Reference	1.001–1.009，interval0.001，9pcs
	1.1–1.9，interval0.1，9pcs		1.01–1.49，interval0.01，49pcs
	1–24，interval1，24pcs		0.5–24.5，interval0.5，49pcs
	25–100，interval25，4pcs		25–100，interval25，4pcs
56pcs JIS B 7506 Standard Reference	0.5–1pcs	121pcs DIN EN ISO3650	1.001–1.009，interval0.001，9pcs
	1.001–1.009，interval0.001，9pcs	Standard Reference	1.01–1.49，interval0.01，49pcs
	1.01–1.09，interval0.01，9pcs		1.6–1.9，interval0.1，4pcs
	1.1–1.9，interval0.1，9pcs		0.5–24.5，interval0.5，49pcs
	1–24，interval1，24pcs		30–100，interval10，8pcs
	25–100，interval25，4pcs		25–1pcs
			75–1pcs
76pcs JIS B 7506	1.005–1pcs	122pcs DIN EN ISO3650Standard Reference	1.0005–1pcs
Standard Reference	1.01–1.49，interval0.01，49pcs		1.001–1.009，interval0.001，9pcs
	0.5–10，interval0.5，20pcs		1.01–1.49，interval0.01，49pcs
	20–50，interval10，4pcs		1.6–1.9，interval0.1，4pcs
	75–1pcs		0.5–24.5，interval0.5，49pcs
	100–1pcs		30–100，interval10，8pcs
			25–1pcs
			75–1pcs

Sets Special for Caliper 0-150mm

Number of Blocks	Composition Size
2 pcs, DIN EN ISO3650 Standard Reference	41.3/131.4
6pcs GB/T 6093 Standard Reference	10/20/20/41.2/81.5/121.8

Sets Special for Micrometer : 0-100mm

Number of Blocks	Composition Size
10pcs,DIN EN ISO3650, 0-25	2.5/5.1/7.7/10.3/12.9/15/17.6/20.2/22.8/25+φ30平晶
10pcs, JIS B 7506, 0-25	1/1.25/1.5/2/3/5/10/15/20/25
11pcs, DIN EN ISO3650,25-50	25/27.5/30.1/32.7/35.3/37.9/40/42.6/45.2/47.8/50
11pcs, DIN EN ISO3650, 50-75	50/52.5/55.1/57.7/60.3/62.9/65/67.6/70.2/72.8/75
11pcs, DIN EN ISO3650, 75-100	75/77.5/80.1/82.7/85.3/87.9/90/92.6/95.2/97.8/100
20pcs, GB/T 6093 , 0-100	5.12/10.24/15.36/21.5/25/30.12/35.24/40.36/46.5/50/55.12/60.24/
20pcs, GB/T 6093 , 0-100	65.36/71.5/75/80.12/85.24/90.36/96.5/100

Inch Series,

A. Class：Class O, Class 1, Class 2

Standard Reference ：ASME B 89

B. Standard Sets：

Number of Blocks	Composition Size
36pcs, ASME B 89 Standard Reference	0.05–1pcs
	0.1–1pcs
	0.1001–0.1009，interval 0.0001，9pcs
	0.101–0.109，interval 0.001，9pcs
	0.11–0.19，interval 0.01，9pcs
	0.2–0.5，interval 0.1，4pcs
	1–2，interval 1，2pcs
	4–1pcs
81pcs, ASME B 89 Standard Reference	0.1001–0.1009，interval 0.0001，9pcs
	0.101–0.149，interval 0.001，49pcs
	0.05–0.95，interval 0.05，19pcs
	1–4，interval 1，4pcs

Each block comes with the factory inspection data ,can also be sent on behalf of the third party inspection agencies.

Standard Reference: GB/T 6093, JB/T 10313, JB/T 10743