Single Ceramic Gauge Blocks

The ceramic block is a kind of high precision length measuring tool. Single ceramic gauge block can be use to size of measurement, can also be combined into the desired size.

Maintenance free, wear resistance, corrosion resistance, non magnetic, non conductive, dimensional stability, can be applied to special working environment. No plastic deformation, small notch does not affect the test results. The thermal expansion coefficient is close to that of steel, which is superior to other traditional materials.

1.Metric Series

Class：

Standard Size：K class（≤100mm） class 0, class 1

Non-Standard Size：class 0 , class 1

Standard Reference：GB/T 6093、 DIN EN ISO3650、 JIS B 7506

Standard length	Class K		Class 0		Class 1
ln	Variation	Limit deviation±	Variation	Limit deviation±	Variation	Limit deviation±
ln≤10mm	0.05μm	0.20μm	0.10μm	0.12μm	0.16μm	0.20μm
10＜ln≤25mm	0.05μm	0.30μm	0.10μm	0.14μm	0.16μm	0.30μm
25＜ln≤50mm	0.06μm	0.40μm	0.10μm	0.20μm	0.18μm	0.40μm
50＜ln≤75mm	0.06μm	0.50μm	0.12μm	0.25μm	0.18μm	0.50μm
75＜ln≤100mm	0.07μm	0.60μm	0.12μm	0.30μm	0.20μm	0.60μm
100＜ln≤150mm	0.08μm	0.80μm	0.14μm	0.40μm	0.20μm	0.80μm

Standard Size：

1.0005mm 25mm 75mm 125mm 150mm

1.001～1.009mm，Space 0.001mm，Total 9 pcs

1.01～1.49mm，Space 0.01mm，total 49 pcs

1.6～1.9mm，Space 0.1mm，total 4 pcs

0.5～24.5mm，Space 0.5mm，total 49 pcs

30～100mm，space 10mm，total 8 pcs

Outline dimension：≤10mm—30*9mm >10mm—35*9mm

2、Inch Series

Class：Class 0, Class 1 , Class 2

Standard Reference：ASME B 89

Standard Size：

0.1001～0.1009″，Space 0.0001″，Total 9 pcs

0.101～0.149″，Space 0.001″，Total 49 pcs

0.05～0.95″，Space 0.05″，Total 19 pcs

1～4″，Space 1″，total 4 pcs

0.16～0.19″，Space 0.01″，Total 4 pcs

Each block comes with the factory inspection data ,can also be sent on behalf of the third party inspection agencies.

Standard Reference: GB/T 6093, JB/T 10313, JB/T 10743